Meet the Nitro Basic Level 8-Sensor Line Following Robot Kit!

The Nitro Basic Level Line Following Robot Kit has been specially prepared by our team.

With this robot kit, an open-source program is provided free of charge.

This robot kit is an unrivaled product with its 8 sensors and PID-controlled software.

In order to keep the center of gravity—an important factor in line following robots—close to the ground, and to ensure better traction of the wheels, the robot’s motors and battery are positioned at the rear of the chassis. In addition, silicone wheels, which are the key element of all line following robots, are specially manufactured and used in this robot kit, ensuring more stable road grip for your robot.

Since the motor mounting brackets are manufactured from metal, there is absolutely no vibration in the robot’s motors. If your robot’s motors are fixed with plastic brackets and vibration occurs, this may lead to disappointment during competitions.

You can purchase our robot kit either disassembled or assembled. An advanced program is provided free of charge with the kit, allowing you to achieve better results in robot competitions.

The material list of the Nitro Line Following Robot Kit is provided below:

1 x NanoZade Arduino Robot Board – with L293 Motor Driver
1 x Arduino Nano + USB Cable
1 x QTR-8RC Infrared Sensor – Digital
2 x L Gearbox 6–12V 250 RPM Plastic Gear DC Motor
2 x Silicone Rubber Wheel (Diameter: 61 mm – Width: 25 mm)
2 x Plastic Caster Wheel
1 x Nitro Line Following Robot Chassis
1 x 7.4V 2S & 11.1V 3S LiPo Battery
1 x LiPo Battery JST Connector
1 x USB Cable
10 x Female-to-Female Jumper Wire Set
10 x Male-to-Male Jumper Wire Set
2 x Metal Motor Mounting Bracket
8 x M3 6 mm Screw
4 x M3 25 mm Screw
8 x M3 10 mm Screw
12 x M3 Nut
4 x 10 mm Standoff Spacer
2 x M2 8 mm Screw
2 x M2 Nut

Nitro Basic Level Line Following Robot Kit

Meet the Nitro Basic Level 8-Sensor Line Following Robot Kit!

Similar Products