StartZade-RO is a professional model that
communicates exclusively via the 38 kHz RC5 protocol and fully complies with
the pairing, start, and stop procedures used in o cial tournaments. When
programmed using the pairing button, it detects the referee’s remote control
and automatically assigns the Start and Stop commands. For safety, the module
requires a power cycle after every Stop command. This behavior is configured in
accordance with international competition standards. Using special programming
signals transmitted by the referee, the module can store new identification
(ID) data in its memory, preventing signal interference between multiple rings
operating side by side. Designed for compatibility with Romania’s
RoboChallenge system, this model is preferred by professionals for its
reliable memory and tournament-ready pairing, start, and stop mechanism.
Using StartZade-RO
When the module is
powered on, the yellow LED illuminates. Press the pairing button on the remote
control to begin the pairing process. Once pairing is complete, the green LED
briefly illuminates and then turns o , indicating that the module is ready.
Press the Start
button to activate the module. The green LED will remain illuminated.
When the Stop command is received, the LED turns o and the module safely enters inactive mode. It cannot be reactivated until it is powered o and back on. The output signal can be inverted using the Signal Switch located on the back of the circuit board.
