Gama Basic Level Line Following Robot Kit
0 Comment
Brand/Manufacturer:Sumozade
Stock:
$ 75.00
Assembled - Unassembled
More:Sumozade
More:Line Follower Robots
Meet Our Basic Level Line Following Robot Kit!
The Gama Basic Level Line Following Robot Kit has been specially prepared by our team.
With this robot kit, programming support is provided free of charge.
In order to keep the center of gravity—an important factor in line following robots—close to the ground, and to ensure better wheel traction, the robot’s motors and battery are positioned at the rear of the chassis. In addition, silicone wheels, which are the key component of all line following robots, are specially manufactured and used in this robot kit, ensuring more stable road grip for your robot.
Since the motor mounting brackets are manufactured from metal, there is absolutely no vibration in the robot’s motors. If your robot’s motors are fixed with plastic brackets and vibration occurs, this may cause disappointment during competitions.
You can purchase our robot kit either disassembled or assembled. A PID-controlled advanced program is provided free of charge with the kit, allowing you to achieve better results in robot competitions.
The material list of the Gama Line Following Robot Kit is provided below:
- 1 x Arduino UNO
- 1 x Arduino Motor Shield – L293 Motor Driver Module
- 1 x 4-Channel Line Sensor Board – 4K Multi Line Analog Sensor
- 2 x L Gearbox 6–12V 250 RPM Plastic Gear DC Motor
- 2 x Silicone Rubber Wheel (Diameter: 61 mm – Width: 25 mm)
- 2 x Plastic Caster Wheel
- 1 x Gama Line Following Robot Chassis
- 1 x 7.4V 2S & 11.1V 3S LiPo Battery
- 1 x LiPo Battery JST Connector
- 1 x USB Cable
- 10 x Female-to-Female Jumper Wire Set
- 10 x Male-to-Male Jumper Wire Set
- 2 x Metal Motor Mounting Bracket
- 8 x M3 6 mm Screw
- 4 x M3 25 mm Screw
- 14 x M3 10 mm Screw
- 14 x M3 Nut
- 4 x 10 mm Standoff Spacer
