Name: SMD/DIP Soldering Practice Kit
Brand: Sumozade
SKU: 514
Price: 8.00 USD
Availability: OutOfStock

Robot Parts, Robot Kits, Mini Sumo Robot, Line Follower Robot, Lipo Battery, Dc Gear Motor and All Robot Parts are at Sumozade.com with Affordable Prices.

Sumozade Robotics | Robot Parts | Robot Kits | Robot Shop

İstanbul

Türkiye

Şişli

Default

Metin Listesi

Metin Verisi

Görsel

Metin

Menü Linkleri

Menü Link

İkon

Ana Link

Oran

Link

Alt Linkler

Alt link

Görsel ve Link Listesi

Görsel ve Link

Footer Linkleri

Footer Link

Başlık

Linkler

İçerik

Özel Link Listesi

Özel Link

Renk

İkon Listesi

İkon Verisi

Açıklama

Taksit Listesi

Taksit Verisi

Logo

Taksitler

Taksit

Detaylı Veri

Sekmeler

Sekme

Sekme Adı

Liste Verileri

Bildirimler

Bildirim

Yazı

Komponentler

Komponent Verisi

Komponent

Form Elemanları

Form Elemanı

Seçenekler (Seçim Türü İse)

Seçenek

Metinler

Kategori-Görsel Listesi

Kategori-Görsel

Kategori

Sumozade

You will have an opportunity to practice and develop your soldering abilities by using this SMD / DIP component soldering kit.

SMD/DIP Soldering Practice Kit

1. Rating: 50mA 12VDC<div>2. Contact Resistance : 50mΩ max (initial)</div><div>3. Insulation Resistance: 100MΩ(minDC 250V)</div><div>4. Dielectric Strength : AC250V(50/60Hz for 1minute)</div><div>5. Electrically Life:100,000cycles</div><div>6. Environment temperature: -25'C+105'C</div><div>7. Operating Force: 180/230(±20gf)</div><div>8. Seal temperature:250'C-280'C</div>

Push Button Power Switch

Sparkfun

<h1 style="box-sizing: border-box; margin: 20px 0px 10px; font-size: 30px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-weight: 500; line-height: 1.1;"><p style="color: rgb(51, 51, 51); box-sizing: border-box; margin: 0px 0px 10px; font-size: 14px;">You can multiplex your analog and digital I/O pins in your DIY projects using this breakout. You will be able to have 16 outputs using 5 inputs wtih the onboard CD74HC4067 16 - channel analog / digital multiplexer / demultiplexer IC.</p><p style="color: rgb(51, 51, 51); box-sizing: border-box; margin: 0px 0px 10px; font-size: 14px;">It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This way allows you to shortcircuit the each channel to SIG pin. It is possible to use UART, I2C and SPI (and the familiars) serial communication protocols too.</p><p style="box-sizing: border-box; margin: 0px 0px 10px; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><font color="#ff0000">Features:</font></span></p><ul style="color: rgb(51, 51, 51); box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; font-size: 14px;"><li style="box-sizing: border-box;">2V to 6V operation</li><li style="box-sizing: border-box;">“On” resistance: 70 Ohms @ 4.5V</li><li style="box-sizing: border-box;">6ns break-before-make @ 4.5V</li><li style="box-sizing: border-box;">Wide operating temperature range: -55C to 125C</li></ul><p style="box-sizing: border-box; margin: 0px 0px 10px; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><font color="#ff0000">Documents:</font></span></p><ul style="color: rgb(51, 51, 51); box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; font-size: 14px;"><li style="box-sizing: border-box;"><a href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/Analog-Digital-Mux-Breakout-v11.pdf" data-mce-href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/Analog-Digital-Mux-Breakout-v11.pdf" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">Schematic</a></li><li style="box-sizing: border-box;"><a href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/Analog-Digital-Mux-Breakout-v11.zip" data-mce-href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/Analog-Digital-Mux-Breakout-v11.zip" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">Eagle Files</a></li><li style="box-sizing: border-box;"><a href="http://www.sparkfun.com/datasheets/IC/cd74hc4067.pdf" data-mce-href="http://www.sparkfun.com/datasheets/IC/cd74hc4067.pdf" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">Datasheet</a></li><li style="box-sizing: border-box;"><a href="http://bildr.org/2011/02/cd74hc4067-arduino/" data-mce-href="http://bildr.org/2011/02/cd74hc4067-arduino/" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">bildr blog - CD74HC4067</a></li><li style="box-sizing: border-box;"><a href="https://github.com/sparkfun/Analog_Digital_MUX_Breakout" data-mce-href="https://github.com/sparkfun/Analog_Digital_MUX_Breakout" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">GitHub</a></li></ul></h1><ul style="color: rgb(51, 51, 51); box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><li style="box-sizing: border-box;"></li></ul>

SparkFun Analog/Digital MUX Breakout CD74HC4067

This 3 colors SMD RGB LED modul is designed for you to generate all the colors from one LED. You can get every shades of the scale of colors by mixing the primary colors (red, green, blue).<p>This modul is very easy and practical to use and it is compatible to operate it via Arduino and many other microcontroller platforms.</p><p>The LED on the board is packaged as SMD RGB. You may use it by applying 0 V to the - pin and PWM voltage to other + pins. It is posible to set the specific colors by using PWM signals.</p>

SMD RGB LED Module

This is 0.95" size RGB OLED screen module. You can get high contrast displays woth no beck lights thanks to OLED technology. This module supports SPI communication interface.<p><strong><font color="#ff0000">Technical Features:</font></strong></p><ul style="color: rgb(0, 0, 0);"><li>Driver: SSD 1331</li><li>Interface: SPI</li><li>Resoluiton: 96x64</li><li>Colour: 65 K</li><li>Outlook: Greater than 160°</li><li>Operating temperature: -20 ~ 70 °C</li><li>Storing temperature: -30 ~ 80 °C</li><li>Operating voltage: 3.3 V / 5 V</li></ul><p style="color: rgb(0, 0, 0);"><strong>Sizes:</strong></p><p><strong><font color="#ff0000"><a href="http://www.waveshare.com/wiki/0.95inch_RGB_OLED_%28B%29">http://www.waveshare.com/wiki/0.95inch_RGB_OLED_%28B%29</a></font></strong></p><p><strong><br></strong></p><p><strong><font color="#ff0000">Document </font></strong></p><p><font color="#0000ff"><b>Detailed information and example codes can be found on Wiki page.</b></font><strong><font color="#ff0000"><br></font></strong></p>

0.95 inch RGB OLED Screen

10mm RGB LED Module

<span style="color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.</span><p style="box-sizing: border-box; margin: 0px 0px 10px; color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">This version of the SparkFun Load Cell Amplifier features a few changes that you specifically asked for! We have separated the analog and digital supply, as well as added a 3.3uH inductor and a 0.1uF filter capacitor for digital supply.</p><p style="box-sizing: border-box; margin: 0px 0px 10px; color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">The HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711. Check the hookup guide below for more information.</p><p style="box-sizing: border-box; margin: 0px 0px 10px; color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">Load cells use a four-wire <a href="http://en.wikipedia.org/wiki/Wheatstone_bridge" data-mce-href="http://en.wikipedia.org/wiki/Wheatstone_bridge" style="box-sizing: border-box; background-color: transparent; color: rgb(51, 122, 183); text-decoration: none;">Wheatstone bridge configuration</a> to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN and YLW. Each color corresponds to the conventional color coding of load cells:</p><ul style="box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><li style="box-sizing: border-box;">Red (Excitation+ or VCC)</li><li style="box-sizing: border-box;">Black (Excitation- or GND)</li><li style="box-sizing: border-box;">White (Amplifier+, Signal+ or Output+)</li><li style="box-sizing: border-box;">Green (A-, S- or O-)</li><li style="box-sizing: border-box;">Yellow (Shield)</li></ul><p style="box-sizing: border-box; margin: 0px 0px 10px; color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">The YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.</p><div style="text-align: center;"><br></div><div style="text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/Y3K_KO7xZ5o" frameborder="0" allowfullscreen=""></iframe></div>

SparkFun Load Cell Amplifier - HX711

<strong><font color="#ff0000">Features:</font></strong><div style="color: rgb(0, 0, 0);"><p> the product features</p><div>Products for WTV020 chip module plug the SD card, supports 32M ~ 1GBit capacity card;</div><div>Supports the FAT file system, SD card as storage medium;</div><div>And supports playback of WAV format files 4Bit ADCPM;</div><div>Supports automatic speech recognition folders and file playback;</div><div>You can play background music and commercials language;</div><div>Control methods are key control, second control and UART232 serial control;</div><div>WTV master chip has WTV020-16SOP and WTV020-20SOP two packages, both of which are compatible;</div><div>You can play any segment of speech;</div><div>Operating voltage: DC2.6 ~ 3.6V;</div><div>Classified by folder store content, easy to operate.</div><div>2 Product Overview</div><div>WTV020 plug-in SD card Voice module, the main chip selection WTV020-16S and WTV020-20S package chips. Voice updates directly through an SD card reader on a PC replacement. Control is also an SD card stored in TXT file changes. The module supports the FAT file system. Support and ADPCM WAV file playback. Supports two-wire serial control mode, key methods and UART232 serial manner. Automatic speech recognition and speech sample rate format.</div></div><div style="text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/mi3KGq6R35A" frameborder="0" allowfullscreen=""></iframe></div>

WTV020 Mini SD Card Mp3 Sound Sensor

35W mono audio amp. Can be used with 10-30VDC (recommended: 24V 2A). Suitable for 4/8 ohm speakers.<p style="color: rgb(0, 0, 0);"><strong>Dimensions:</strong> 43 mm x 31 mm</p><p><strong><a href="http://www.nxp.com/documents/data_sheet/TDA8932B.pdf" target="_blank"><font color="#0000ff">TDA8932 datasheet</font></a></strong></p><div style="text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/chy-NQa19YA" frameborder="0" allowfullscreen=""></iframe></div>

TDA8932 35W Mono Audio Amplificator

1.the onboard TTP223 capacitive touch touch sensing IC<div>2, board level status indicator</div><div>3, working voltage: 2.0V-5.5V</div><div>4, PCB board size: 29 (mm) x16 (mm)</div><div>Capacitive digital touch sensor switch hand touch detection module</div><div>Touch keys to detect IC, providing 1 touch keys. Touch detection IC is used to replace the traditional</div><div>Design of a button. Low power consumption and wide operating voltage are the DC and AC features of the touch keys.</div><div>Working voltage 2.0V~5.5V</div><div>After power up to about 0.5sec of the stability of the time, this period of time not to touch the keys,</div><div>All functions are prohibited at this time</div><div>Self calibration is always performed</div><div>When the key is not touched, the calibration cycle is about 4.0sec</div><div>application</div><div>Wide range of consumer products</div><div>Waterproof electrical equipment</div><div>Button key</div><div>On board with blue LED indicator light</div><div>Board size: 15.5 X 23.5 mm</div><div>1 pin for power + VCC</div><div>2 pin for the output OUT</div><div>3 pin for power - GND</div><div>Output OUT can directly control the relay module of our shop, you can directly enter the microcontroller IO or ARDUINO development board IO</div><div>Module output mode can be selected. (with tin short circuit board of the A or B pads, you can change the output mode, short circuit to 1, off 0)</div>

TTP223 1 Way Touch Switch

This is 0.96" size two - color OLED screen module. You can get high contrast displays woth no beck lights thanks to OLED technology. This module supports 3 or 4 cables SPI and I2C connection interfaces.<p><strong><font color="#ff0000">Technical Features:</font></strong></p><ul style="color: rgb(0, 0, 0);"><li>Driver: SSD 1306</li><li>Interface: 3 or 4 cable SPI / I2C</li><li>Resoluiton: 128x64</li><li>Colour: Yellow, green</li><li>Outlook: > 160°</li><li>Operating temperature: -20 ~ 70 °C</li><li>Storing temperature: -30 ~ 80 °C</li><li>Operating voltage: 3.3 V / 5 V </li></ul><div><br></div><div><br></div><div><font color="#0000ff"><b><br></b></font></div><div><font color="#0000ff"><b>https://www.waveshare.com/wiki/0.96inch_OLED_(B)</b></font><br></div><div><br></div><div><br></div>

0.96 inch OLED Screen

<span style="color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">This modul is an Analog to Digital Converter providing ADC for the microcontrollers do not have an internal ADC modul like Raspberry Pi and many others.</span><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><font color="#ff0000">Features:</font></span></p><ul style="color: rgb(51, 51, 51); box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><li style="box-sizing: border-box;">Reasolution: 10 bits</li><li style="box-sizing: border-box;">Number of inputs: 11 (AN0 - AN11)</li><li style="box-sizing: border-box;">Readings per second (SPS): 38 K</li><li style="box-sizing: border-box;">Serial port out</li><li style="box-sizing: border-box;">It is possible to set a referance voltage with REF+ and REF- pins</li><li style="box-sizing: border-box;">Uses just 3 I/O pins of the microcontroller</li><li style="box-sizing: border-box;">Operating voltage: 43 mm x 23 mm</li></ul><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><a href="http://www.waveshare.com/wiki/TLC1543_ADC_Board" data-mce-href="http://www.waveshare.com/wiki/TLC1543_ADC_Board" style="box-sizing: border-box; background-color: transparent; text-decoration: none;"><font color="#3366ff">You can visit the Wiki page of the product for example code, circuit schematics and the datasheet.</font></a></span></p>

TLC1543 Analog-Digital Converter

This is an I2C controlled stereo FM radio modul that can be used with Arduino or other microcontoroller boards. You can build you own stereo FM radio with this product. The module contains 1/8" (3.5 mm) headset / speaker jack and external antenna connection. It uses TEA5767 chip as Tuner circuit and TDA1308 chip as audio amplifier.<div><strong><font color="#ff0000">Technical Details:</font></strong></div><div style="color: rgb(0, 0, 0);">Power supply: 5V<br>Circuit board size: 31mm * 30mm<br>Frequency range : 76-108 MHZ<br>With the power supply reverse protection diode<br>Power output filter inductance on board<br>Multiple capacitance combination filter<br>Blue power light<br>The antenna port can be directly pull plug<br>I2C bus communication<br>Built in Phillips FM radio special chip module TEA5767<br>On board headphone amplifier chip TDA1308 as audio amplification</div><div><a href="http://www.voti.nl/docs/TEA5767.pdf" target="_blank"><strong><font color="#0000ff">TEA5767 datasheet</font></strong></a></div><div><strong><a href="http://www.doctormonk.com/2012/03/tea5767-fm-radio-breakout-board-for.html" target="_blank"><font color="#0000ff">Sample project</font></a></strong></div>

TEA5767 FM Stereo Radio Module

<font face="tahoma, arial, verdana, sans-serif">​</font><span style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; color: rgb(51, 51, 51);">You can switch loads up to DC 5-36V/15A with this module. It operates like a relay board. Supports PWM input for proportional control (i.e DC motor speed control).</span><p style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; box-sizing: border-box; margin: 0px 0px 10px;"><span style="box-sizing: border-box; font-weight: 700;"><font color="#ff0000">Technical specifications:</font></span></p><ul style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; color: rgb(51, 51, 51); box-sizing: border-box; margin-top: 0px; margin-bottom: 10px;"><li style="box-sizing: border-box;">Operating voltage: DC 5-36V</li><li style="box-sizing: border-box;">Trigger source: Digital high-low (DC3.3V-20V) (can be connected IO port of microcontroller, <br style="box-sizing: border-box;">PLC interfaces, DC power, etc. The module can access PWM signal, which can perfectly supported the frequency of 0-20KHZ)</li><li style="box-sizing: border-box;">Output current: 15A continuous, 30A burst</li><li style="box-sizing: border-box;">Output power: 400W max.</li><li style="box-sizing: border-box;">Operating temperature: -40~85°C</li><li style="box-sizing: border-box;">Dimensions: 34 × 17 × 12mm</li></ul><div style="text-align: center;"><font color="#333333" face="Helvetica Neue, Helvetica, Arial, sans-serif"><span style="font-size: 14px;"><br></span></font></div><div style="text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/ieaUl1jhDb0" frameborder="0" allowfullscreen=""></iframe></div>

15A 400W PWM Supported MOSFET Swtiching Module

Adafruit

<span style="color: rgb(51, 51, 51); font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;">TCA9548A modul allows you to use 8 (same I2C adress) device at the same time. If your I2C devices like I2C sensors have constant ardesses and if you need to use them together, this MUX is just for you. The default I2C adress of this board is 0x70 and you will we able to communicate between your microcontroller and your I2C devices by sending 1 byte information and and choosing one of these 8 connection. Additionally, the I2C adress of this device is able to be changed between 0x70 and 0x77. This means you can use 8 of this boards and connect (8 x 8) 64 I2C devices to the same microcontroller at the same time. This board operates both 3 V and 5 V with its onboard logic voltage level regulators.</span><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><font color="#ff0000">Features:</font></span></p><ul style="box-sizing: border-box; margin-top: 0px; margin-bottom: 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><li style="box-sizing: border-box;">I2C adress: 0x70 as default, possible to change between 0x70 and 0x77</li><li style="color: rgb(51, 51, 51); box-sizing: border-box;">Dimensions: 30.6 mm x 17.6 mm x 2.7 mm</li><li style="color: rgb(51, 51, 51); box-sizing: border-box;">Weight: 18 gr</li></ul><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px;"><span style="box-sizing: border-box; font-weight: 700;"><a href="https://learn.adafruit.com/adafruit-tca9548a-1-to-8-i2c-multiplexer-breakout?view=all" data-mce-href="https://learn.adafruit.com/adafruit-tca9548a-1-to-8-i2c-multiplexer-breakout?view=all" style="box-sizing: border-box; background-color: transparent; text-decoration: none;"><font color="#0000ff">Click here for the Arduino example application.</font></a></span></p><div style="text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/o_QivoOFjuM" frameborder="0" allowfullscreen=""></iframe></div>

TCA9548A I2C Multiplexer

This is a Arduino and other microcontrollers compatible display modul contains 2 - 4 digit 7 - segmentd display, 8 buttons and 8 LEDs. You can use this modul on your sensor measuring and clock etc. projects. There is a TM1638 controller IC on this board and it is possible to control this board serial using 2 pins.<div style="color: rgb(0, 0, 0); text-align: center;"><br></div><div style="color: rgb(0, 0, 0); text-align: center;"><br></div><div style="color: rgb(0, 0, 0); text-align: center;"><iframe width="560" height="315" src="https://www.youtube.com/embed/2rT2YqhSARc" frameborder="0" allowfullscreen=""></iframe></div><div style="color: rgb(0, 0, 0); text-align: center;"><br></div><div style="text-align: center;"><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; text-align: start;"><a href="https://code.google.com/p/tm1638-library/" data-mce-href="https://code.google.com/p/tm1638-library/" style="box-sizing: border-box; background-color: transparent; outline: 0px;"><b><font color="#0000ff">Click here for Arduino Library.</font></b></a></p><p style="box-sizing: border-box; margin: 0px 0px 10px; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; text-align: start;"><a href="http://retrocip.cz/files/tm1638.pdf" data-mce-href="http://retrocip.cz/files/tm1638.pdf" style="box-sizing: border-box; background-color: transparent; text-decoration: none;"><b><font color="#0000ff">Click here for TM168 datasheet.</font></b></a></p></div>

Tm1638  Arduino Compatible 7-Segment Display and Button Module

<strong style="color: #000000;">This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your Arduino sensor shield module. Through programming, </strong><strong style="color: #000000;">you can read and write to the SD card using your Arduino.</strong><p><br><strong><span style="color: #ff0000;">Features:</span></strong></p><ul style="color: #000000;"><li><p>1. Input Voltage: 3.3V/5V</p></li><li><p>2. Can be used for SD Card more eaisly, such as for Camera/DV/DVR/GPS/Tablet/MP3 Player, MCU/ARM system control.</p></li><li><p>3. With all SD SPI Pins out :MOSI, SCK, MISO and CS ,for further connection</p></li><li><p>4. Through programming, you can read and write to the SD card using your arduino</p></li><li><p>5. Make your SD application more easier and simple</p><p></p><p></p><p></p></li></ul><br><div style="text-align: center;"><img src="http://sumozade.com/Data/EditorFiles/arduino-sd-card-module.jpg?1509279923572" alt="" width="652" height="535"><br><br><br><br><br><br><br><br><br><iframe width="560" src="//www.youtube.com/embed/oBuqb6LkSec" height="314"></iframe></div>

SMD/DIP Soldering Practice Kit

Similar Products