Rapid V2 Line Follower Robot Kit - Unassembled

Meet Our new DesignRapid V2 Arduino Based Line Follower Robot Kit!

It is a preferred robot kit for all robot competitions, projectassignments, robotics and arduino trainings.

This kit ship Unassembled. 

It is a robot suitable for national andinternational robot competitions, we provide as free the Arduino codewith PID algorithm that you can participate in the competitions. 

The installation manual of the product and the necessary installation programsare sent to you by e-mail. (Assembly takes approximately 50 minutes) It isspecially produced for MEB Robot Competition and other Robot Competitions.

In order to keep the gravity at the center of robot, which is an importantelement in line follower robots, the robot's motors and battery are speciallyplaced at the back of the body so that it does not lift the front in suddenmovements and climbs the ramps more easily in competitions. In this way, thehandling of your robot will be more stable.

With the 2 dip switches on the robot controller board, you can choose thetrack or based speedo of the robot,using dip switches as tactices in the robotbefore the start and select the software you want instantly. With this feature,you will be one step ahead of other line follower robots!

You can control the Rapid V2 Arduino Line Follower Robot Kit by purchasinga bluetooth unit by update the program on your phone or tablet. In addition,inthis way your robot can use remotely, you can instantly determine the maximumspeed, average speed, PID, etc. You can control the Rapid V2 Arduino LineFollower Robot Kit by purchasing a bluetooth unit by update the program on yourphone or tablet. In addition,in this way your robot can use remotely, you caninstantly determine the maximum speed, average speed, PID, etc.

General Properties of the Materials in the Kit;

Rapid Line Follower Board: It is a very practicalline follower robot board that can be control with an arduino nano. With the 2dip switches on the control board, you can choose the track or based speed inthe competitions and send the track information to the robot before thetraining.

Arduino Nano: It is the latest version of Arduino development board.Digital I/O: It Has 14 Pins (6 PWM Supported) Pin Structure. The software ofthe robot is in this board.

TB6612FNG Dual MotorDriver Circuit: With Toshiba TB6612FNGmotor driver, two DC motors can be controlled with 1.2A continuous and 3.2Ainstantaneous current. You can control the direction and speed of 2 dc motorsindependently of each other. Combined with an arduino, it creates a greatplatform for projects such as line follower robots, rc vehicles, mobile or autonomousrobots.

QTR-8A Infrared Sensor: Originally designedfor line follower robots, this sensor board contains 8 IR LED/phototransistorpairs placed 1cm apart. It is mostly preferred in line follower robots becauseit works stably and smoothly. Do not use non-original QTR Sensors to avoiddisappointment in competitions.

12V 2500 Rpm Force-Up Dc Motor: Micro geared motors with 2500 Rpm speedare used in our robot kit. You can put forward high-quality and ambitiousprojects with these high-quality motors, which are the preference of the robotsthat are ranked in the competitions. We do not recommend you to participate incompetitions with lower rpm engines.

BOND Silicone Wheels: Domestic productionsilicone wheels, which have been used by many teams for years in line withrobot projects, have been preferred as wheels. With its perfect grip surface,your robot will travel on the track without skidding.

You can buy our robot kit disassembled or assembled, besides the kit,software with PID program for competitions is provided free of charge, you candevelop this software and achieve much better success.

 

RapidArduino Line Follower Robot Kit Materials List is Below;

• 1 x Rapid Line Follower Robot Board (Includes Arduino Nano + TB6612FNG)
• 1 x MZ80 Object Sensor - 80cm Range Infrared Sensor
• •2 x 12V 2500 Rpm Force-Up DC Motors (High Quality Line Follower Motors)
• 1 x QTR-8A Infrared Line Sensor – Analog
• 1 x Bond Silicone Wheel Set
• 2 x 16mm Dc Motor Holder (Special Production)
• 2 x Plastic ball caster Wheels
• 1 x Rapid Line Follower Robot Body
• 1 x 11.1Volt Lipo Battery between 300-500mAh
• 1 x Cable Set
• 1 x Consumables (Nut+Bolt etc. forassembly)

All spare parts of theRobot Kit are always in stock, we guarantee that we will always support youwith our pre-sales and after-sales technical support team. 

You can ask all your questions about ourrobot kit without hesitation, by contacting us through the contact section.