Technicial Specifications:
It has 1 logic pin.
The logic output can changeable with switch which under of the start module (This feature is suitable for all robot competitions in the world).
Supply voltage: 3.3V - 5V.
Card Dimensions: 8mm x 15mm x 7mm (Smallest Size Start Module).
The module has 2 signal which is parallel to make it easy to usable for all designed circuit .
How it Works:
Connect VCC (+), GND (-) and Signal to the module. Press the button on the module, press and hold the any button on the ir remote control for 3 seconds.
If you press the saved button, the yellow led on the starter module flashes and the red led turns on and the robots start to operate at the same time. If you press the same button again, the robot will stop.
If you press a button other than the button you saved, only the yellow LED will light. This indicates that the signal cannot be detected or is not correct.
The module is shipped with male and female 4-pin pins, so you can easily assemble to all your circuits.