Rapid Line Follower Robot Kit - Unassembled
90,00 USD
Rapid Arduino Based Line Follower Robot Kit
General Specifications of Kit Parts
Arduino Uno R3: It will be send with software .
Sumozade Arduino Robot Shield: it has L298n Motor driver on shield, and you can drive 2 dc gear motors , and shield is compatible with Arduino .This shield is multifunctional for rc cars , mobile and autonomous project.
QTR-8RC Infrared Sensor : This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate digital I/O-measurable output.
12V 2000 Rpm Force-Up Dc Motor: Forceup motors gives you High Speed and Ultra Torque
Bond Silicone Wheels: High Grip and High Traction on Dohyo
You can buy Kit Unassembled.
Time To Meet Rapid Linefollower kit
It is suitable for Robotic competition, Project for University and Arduino Education. This kit Arduino Based kit.
This kit Has advanced software for National and Internatinal Competition. When you buy this kit, Advenced Software will be given to you as Free. Assembly guide and documentions will be send in Kit. It takes 30 minutes for assembling .
Center of gravity is very important for linefollower and center of gravity must be near ground. This desing will be prevent to get up ahead of robot. because of that, battery and motors placed under robot to keep stable driving.
Rapid Kit gives you oppurtinty bluetooth control. You can buy bluetooth module .
You can control and drive your robot by mobile phone and tablet. Also you can change PID, maximum speed, average speed on mobile phone, tablet or smart device. And you save time.
General Specifications of Kit Parts
Arduino Uno R3: It will be send with software .
Sumozade Arduino Robot Shield: it has L298n Motor driver on shield, and you can drive 2 dc gear motors , and shield is compatible with Arduino .This shield is multifunctional for rc cars , mobile and autonomous project.
QTR-8RC Infrared Sensor : This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate digital I/O-measurable output.
12V 2000 Rpm Force-Up Dc Motor: Forceup motors gives you High Speed and Ultra Torque
Bond Silicone Wheels: High Grip and High Traction on Dohyo
The Rapid Arduino Line Following Robot Kit Material List is Below;
- 1 x Arduino Uno R3
- 1 Pieces x SumoZade Arduino Robot Shield
- 2 x 12V 2000 Rpm Force-Up Dc Motor
- 1 x QTR-8RC Infrared Sensor - Digital
- 2 Pieces x Bond Silicone Wheel
- 2 x 16mm Metal Motor Holder Apparatus
- 2 Pieces x Plastic Ball Caster Wheel
- 1 x Robot Body
- 1 x 11.1Volt 500mAh Lipo Battery
- 1 x 20 Female to Female Jumper Cable Set
- 1 set x (Nut for Mounting + Bolt + Cable)
You can buy Kit Unassembled.
Software comes by Kit and you can see video of kit on youtube channel
| Quantity | |
| Discount |
Be the first to comment on this product!