Out of Stock

Fingerprint Scanner - TTL (GT- 511C3)

Out of Stock Alert when in stock



  • Features
  • Payment Options
  • Comments (0)
  • The module itself does all of the heavy lifting behind reading and identifying the fingerprints with an on-board optical sensor and 32-bit CPU. It give TTL serial output. So, you can easily embed to your microprocessor projects and you can use it directly. The module can store up to 200 different fingerprints and you can obtain this fingerprints database from sensor and you can use this database with other modules without making the introduction of the fingerprints.

    Connect this module to your microprocessor's UART port to start for using and send the required command to save your fingerprint. Module will ask you to read your fingerprint three times. Sensor has capable of 360° recognition. You can use your own sofware from your computer directly by connecting converter such as FTDI or similar ones.

    Note: The module does not come with a cable. Connection cable is not available. You can use cable like a JST-SH type cable.

    • Dimensions: 37 x 17 x 9.5 mm
    • High-Speed, High-Accuracy Fingerprint Identification using the SmackFinger 3.0 Algorithm
    • Download Fingerprint Images from the Device
    • Read and Write Fingerprint Templates and Databases
    • Simple UART protocol (Default 9600 baud)
    • Capable of 1:1 Verification and 1:N Identification
Prepared by  T-Soft E-Commerce.